BIGUMA®-CS Tape

BIGUMA®-CS Tape

Polymer bitumen based sealing tape

Description

BIGUMA®-CS Tape is used for sealing open seams and cracks up to a width of 3 mm in asphalt pavements. The tape covers the seam or crack area and effectively prevents the penetration of surface water. Preferably BIGUMA®-CS Tape is used for minor roads in local road construction, as well as for pavements and cycle paths.

Advantages

  • cold application, therefore problem-free handling
  • smaller damage can be repaired quickly
  • can be covered with asphalt mixture
  • high ageing resistance by the usage of polymer modified bitumen
  • resistant against aqueous solutions, salts and thinned acids, or similar
  • bituminous building material and therefore problem-free recyclable

Available packaging

Roll width: 40 mm (standard). Thickness: approx. 3 mm. Roll length: 22 m. 2 rolls per carton (44 m).

Technical info

Application instructions

Application

The seam or crack area must be dry and free from loose debris. Brush primer COLZUMIX®-VfB on both sides of the area — the quantity depends on the subsoil; avoid overdose in all cases. After the primer has dried, roll out BIGUMA®-CS Tape and press lightly onto the crack area. Remove the silicone paper; the surface can then be covered with crushed stone fines for blunting. Press the tape down using a roller.
Note: if the temperature is below 10 °C, adhesion can be improved by warming the asphalt with a propane flame.

Cleaning agents

Equipment: BIGUMA®-SWS, petrol and commercial solvents
Skin contact: hand washing paste

Storage

Store cool and dry; shelf life at least 12 months.

Technical data

Roll width 40 mm (standard)
Thickness approx. 3 mm
Roll length 22 m

Want to order or have questions?

Get in touch – we'll help you choose the right products, advise on usage and prepare a quote.

This website uses only essential technical cookies required for proper functionality. No analytics, marketing, or third-party cookies are used. Privacy Policy