NILA®-Plast GP 2.0-3.0 (Type II)

Name: NILA®-Plast GP 2.0-3.0 (Type II)
Brand: NILA
SKU: nila-plast-gp-2-0-3-0

Layable hot plastic compound for type I markings, traffic class P7

Want to order or have questions?

Get in touch – we'll help you choose the right products, advise on usage and prepare a quote.

+370 6 858 5782 andrius@biguma.lt

Description

Regardless of whether you want to apply or inlay the marking material, with NILA®- Plast GP 2.0-3.0 (Type II) you have made the right choice: The bonding agent and composition of this resin-bonded marking material have been specially chosen to enable seamless use of either processing method. NILA®- Plast GP 2.0-3.0 (Type II) is suitable for creating markings on all types of asphalt road surfaces, such as roads, motorways, sports surfaces, airports and car parks, with improved night visibility in wet weather conditions.

Technical standards: DIN EN 1436, EN 13197

Advantages

hot plastic compound for type II markings
improved night visibility in wet weather conditions
layable hot plastic compound
premium marking material with stone dust, sand and glass beads
high softening point and resistance to deformation, low abrasion
good grip with excellent adhesion and easy to use

Available packaging

Flat carton (block goods): 25 kg (40 per pallet). Polyethylene bag (powder goods): 20 kg (42 per pallet).

Downloads

Technical datasheet

Download PDF file

Technical info

Application instructions

Application

NILA®-Plast GP 2.0 is applicable at temperatures from 180 to 210 °C in a layer thickness of 3 mm, screwed or extruded or screwed and inlaid in layer thickness 3/5 mm or 6/8 mm. During application 450 g/m² drop-on material WEISSKER DUOLUX® 121 AH 1 (125–1180 µm) 3:1 must be dropped on to the thermoplastic immediately to reach the required night-time visibility. The night-time visibility in wet conditions will be achieved by the rough surface of the onlaid or inlaid thermoplastic and the embedded drop-on beads and further on by the greater diameter premix glass beads. The road surface must be dry, clean and free of dust and oil. In spring and autumn the relative humidity of the air (dew point) must be considered. If the minimum air temperature is below +5 °C, the road surface must be warmed before application. More consumption in case of roughness of the underground must be separately calculated.

Material consumption

At 3 mm layer thickness: 6.18 kg/m². Width-based: 10 cm → 618 kg/1,000 m; 12 cm → 742 kg/1,000 m; 15 cm → 927 kg/1,000 m.

Storage

Shelf life of block material is unlimited. Shelf life of powder material is one year.

Technical data

Base	Hydrocarbon resin, quartz sand, extender
Solvent	Solvent-free
Colour	White
Necessary working operations	1
Specific gravity	approx. 2.06 g/cm³
Softening point Wilhelmi	approx. 101 °C
Nüssel deformation	approx. 1.0
Skid resistance	≥ 45 SRT-units
Dry weight	100%
Wear resistance (BASt, 4M roll-overs)	≥ 90% (class P7, EN 13197)