NILA®-Plast PRO 3.0-P (Type I)
Hot plastic compound suitable for laying both on and in areas for type I markings, traffic class P7
Want to order or have questions?
Get in touch – we'll help you choose the right products, advise on usage and prepare a quote.
Description
No matter whether driven over rarely, frequently or constantly – NILA®- Plast PRO 3.0-P (Type I) is characterised by low abrasion, high resistance to deformation and very good adhesion – making it the ideal product for Type I thick-film markings. This is also proven by successful AETEC testing on the wear simulator: After four million wheel passes, durability was 100 per cent, which corresponds to traffic class P7 according to DIN EN 13197. NILA®- Plast PRO 3.0-P (Type I) is available in 25 kg flat cartons, 20 kg polyethylene bags and 250 kg big bags.
Technical standards: DIN EN 1436, DIN EN 13197
Advantages
- Hot plastic compound for type I markings
- Suitable for markings that are driven over rarely, frequently or constantly
- Hot plastic compound suitable for laying both on and in areas
- Premium marking material with stone dust, sand and glass beads
- High softening point, resistance to deformation, low abrasion
- Good grip with excellent adhesion and easy to use
Available packaging
Downloads
Technical info
Application instructions
Application
Weather conditions
The road surface must be dry, clean, free of dust and oil. In spring and autumn the relative humidity of the air (dew point) must be considered. If the minimum temperature is below +5 °C, the road surface must be warmed before application.
Material consumption
10 cm wide: 610 kg / 1,000 m
12 cm wide: 732 kg / 1,000 m
15 cm wide: 915 kg / 1,000 m
Storage
Shelf life of block material is unlimited. Shelf life of powder material is one year.
Technical data
| Base | hydrocarbon resin, quartz sand, extender |
| Solvent | solvent free |
| Colour | white |
| Necessary working operations | onlaid or inlaid, drop-on |
| Softening point (Wilhelmi) | approx. 110 °C |
| Nüssel deformation | approx. 1.0 |
| Skid resistance | ≥ 60 SRT-units |
| Day-time visibility (with drop-on material, 4 million rollovers) | ≥ 0.75 (LF5) |
| Specific gravity | approx. 2.03 g/cm³ |
| Night-time visibility (with drop-on material, 4 million rollovers, dry) | 200 mcd/m²×lx |
| Wear resistance (AETEC wear simulator, 4 million roll-overs) | 100 % (class P7 per DIN EN 13197) |
Want to order or have questions?
Get in touch – we'll help you choose the right products, advise on usage and prepare a quote.