NILA®-Spray SpK 2.0-1.5 (Type II)

Name: NILA®-Spray SpK 2.0-1.5 (Type II)
Brand: NILA
SKU: nila-spray-spk-2-0-1-5

Sprayable thermoplastic compound for type II markings, traffic class P6

Want to order or have questions?

Get in touch – we'll help you choose the right products, advise on usage and prepare a quote.

+370 6 858 5782 andrius@biguma.lt

Description

NILA®- Spray SpK 2.0-1.5 (Type II) is a sprayable marking material for creating type II markings for traffic class P6 thoroughfares. This marking material is suitable for all kinds of asphalt surfaces, such as roads, motorways, sports surfaces as well as airports and car parks, with improved night visibility in wet weather conditions. NILA®- Spray SpK 2.0-1.5 (Type II) is applied to surfaces at temperatures of between 200 and 220 degrees Celsius in a thickness of 1.5 mm by spraying using a self-propelled laying machine with an extruder or screed box.

Technical standards: EN 1436, EN 13197

Advantages

Sprayable hot plastic compound for type II markings
Improved night-time visibility in wet conditions
Premium marking material with selected stone dust, sand and glass beads
High softening point, resistance to deformation and low abrasion
Good grip with very good adhesion and easy to use

Available packaging

Flat carton (block goods): 25 kg Polyethylene bag (powder goods): 25 kg

Downloads

Technical datasheet

Download PDF file

Technical info

Application instructions

Application

NILA®- Spray SpK 2.0 is applicable at temperatures from 200 to 220 °C in a layer thickness of 1.5 mm, hot sprayed, screwed or extruded. During application 450 g/m² drop-on material WEISSKER DUOLUX® 121 AH 1 (125–1180 µm) 3:1 must be dropped on to the thermoplastic immediately to reach the required night-time visibility. The road surface must be dry, clean, free of dust and oil. In spring and autumn the relative humidity of the air (dew point) must be considered. If the minimum temperature is below +5 °C, the road surface must be warmed before application.

Weather conditions

The road surface must be dry, clean, free of dust and oil. In spring and autumn the relative humidity of the air (dew point) must be considered. If the minimum temperature is below +5 °C, the road surface must be warmed before application.

Material consumption

With a layer thickness of 1.5 mm: 2.85 kg/m².
10 cm wide: 285 kg / 1,000 m
12 cm wide: 342 kg / 1,000 m
15 cm wide: 428 kg / 1,000 m

Storage

Shelf life of block material is unlimited. Shelf life of powder material is one year.

Technical data

Base	hydrocarbon resin, quartz sand, extender
Solvent	solvent free
Colour	white
Necessary working operations	hot spray, drop-on
Specific gravity	approx. 1.90 g/cm³
Softening point (Wilhelmi)	approx. 98 °C
Nüssel deformation	approx. 1.0
Skid resistance	≥ 45 SRT-units
Wear resistance (BASt wear simulator, 2 million roll-overs)	≥ 90 % (class P6 per EN 13197)