PROXAN®-CP-S
Two-component, sprayable primer for polysulphide sealants on absorbent substrates
Want to order or have questions?
Get in touch – we'll help you choose the right products, advise on usage and prepare a quote.
Description
Our two-component primer PROXAN®- CP-S can be applied quickly, as its low viscosity means it can be sprayed. It is particularly suitable for pre-treating porous, absorbent surfaces, such as concrete, brickwork and wood, and is a perfect way to prepare surfaces for the application of the sealant.
Advantages
- EP-resin based
- Save time with spraying
- Suitable for absorbent substrates
- Excellent adhesive properties
Available packaging
Combination container 1 litre (Components A and B): 10 packs per carton Combination container 5 litre (Components A and B)
Downloads
Technical datasheet
Download PDF file
Technical info
Application instructions
Application
The substrate must be dry, free of dust and grease and without any loose components. Components A and B are thoroughly mixed and the primer evenly applied to the joint flanks by spraying or using a brush. After a flash-off time of 30 minutes to 2 hours (depending on temperature) the sealant can be introduced. The primer must not have fully dried. If more than 24 hours have passed, the old layer must be roughened and new primer applied.
Storage
Can be stored for 12 months in a dry location at temperatures below +25 °C in a closed original container.
Technical data
| Chemical basis | epoxy resin |
| Processing time | min. 6 hours |
| Flash-off time | 30 minutes to 2 hours (depending on temperature) |
| Mixing ratio | A : B = 1 : 1 mass portions |
| Consumption | depending on application method and joint dimensions |
Want to order or have questions?
Get in touch – we'll help you choose the right products, advise on usage and prepare a quote.